Home  
  What's New  
  Products  
  Literature/Applications  
  Service/Support  
  About Us  
  Sitemap  
  Account  
  Shopping Cart  
  Search  
search
Tosoh Bioscience LLC: The Chemistry of Innovation
Gel Permeation Chromatography
Hxl
Hhr
TSKgel G1000Hhr
TSKgel G2000Hhr
TSKgel G2500Hhr
TSKgel G3000Hhr
TSKgel G4000Hhr
TSKgel G5000Hhr
TSKgel G6000Hhr
TSKgel G7000Hhr
TSKgel GMHhr-H mixed bed
TSKgel GMHhr-H(S) HT mixed bed
TSKgel GMHhr-L mixed bed
TSKgel GMHhr-M mixed bed
TSKgel GMHhr-N mixed bed
SuperH
SuperHZ
SuperMultiporeHZ


The TSKgel Hhr column line consists of eight columns with different pore sizes, TSKgel G1000Hhr through TSKgel G7000Hhr, and five columns with an extended linear range of the calibration curve. The calibration curves are shown below.

Calibration curves on TSKgel Hhr columns



Main characteristics

  • Maximum operating temperature for TSKgel Hhr-type columns is 140°C.
  • Broad solvent range. All TSKgel Hhr-type columns are shipped in THF, which can be exchanged for a wide variety of organic solvents as shown below.
  • TSKgel Hhr-type columns are conventional GPC columns with dimensions of 7.8mm ID x 30cm. Most HPLC systems do not require optimization of extra-column bandbroadening effects when working with conventional GPC columns.


Solvent compatibility for TSKgel Hhr (and SuperH) columns
The column shipping solvent limits the types of solvents that can be used with each column type.

Column type

Shipping solvent*

Can be replaced with

SuperH and Hhr1

Tetrahydrofuran2

acetone, ethanol, quinoline, benzene, o-dichlorobenzene, ethyl acetate, dodecane, FC-113, carbon tetrachloride5, dichloromethane, dichloroethane, trichloroethane, n-hexane, cyclohexane, xylene, tetrahydrofuran, chloroform, 1,4-dioxane, hexafluoroisopropanol, toluene, 1-chloronaphthalene, dimethylaceto acetamide, methyl ethyl ketone, trichlorobenzene, m-cresol, dimethylformamide, methylpyrrolidone, o-chlorophenol/chloroform, dimethyl sulfoxide, pyridine

Notes:
1
) In case of TSKgel SuperH and Hhr, see table below for appropriate flow rates for solvent exchange. After switching to a very polar solvent, switching to a nonpolar is not recommended.
2) All TSKgel Hxl, Hhr, SuperHZ and SuperH analytical columns are shipped containing tetrahydrofuran (THF), except High Temperature (HT) columns, which contain o-dichlorobenzene.
3) Prolonged exposure to carbon tetrachloride can corrode the stainless steel parts of a column and an HPLC system.
*  100% methanol cannot be used with TSKgel H-type columns; use this solvent with TSKgel SW-type or Alpha-type columns.
** TSKgel H columns may be specially ordered with this shipping solvent.


Recommended flow rates (mL/min) for solvent exchange in TSKgel SuperH and Hhr columns

Solvent

SuperH (6.0mmIDx15cm)

Hhr (7.8mmIDx30cm)

n-Hexane

0.50

0.9

methyl ethyl ketone

0.40

0.7

dichloromethane, ethyl acetate

0.35

0.6

toluene, chloroform

0.30

0.5

dimethylformamide

0.20

0.4

carbon tetrachloride, pyridine

0.15

0.3

dimethyl sulfoxide, dioxane, ethanol, N-methylpyrrolidone, o-dichlorobenzene

0.10

0.2

quinoline, hexafluoroisopropanol, 1-chloronaphthalene

0.05

0.1


Recommended Solvents by Application for TSKgel H-type columns

Recommended solvent

Application

THF

polystyrene, epoxy resin, phenoxy resin, polycarbonate, polyisoprene, polyvinyl acetate, polyvinyl chloride, monoglycerides, fatty acids, polybutadiene, poly(methyl methacrylate), poly(styrene-butadiene),
poly(styrene-acrylonitrile)

N,N-Dimethylformamide (DMF) +/- 5mM LiBr

polyvinyl chloride, polyvinyl fluoride, urea resins, polyurethane, polystyrene, polyester, polyimido ether, polyimido ester, polyphenol (aqueous solution), polyacrylonitrile

o-Dichlorobenzene (ODCB)

polyethylene, polypropylene

Chloroform

polycarboxylic ether, acrylic resin, epoxy resin, polystyrene

m-Cresol/Chloroform

nylon, polyseter, polyamide, poly (ethylene terephthalate)

Toluene

polybutadiene, polysiloxane


Columns with linear calibration curves
The TSKgel Hhr product line contains five linear, or mixed-bed columns, in which particles with different pore sizes are blended to provide an extended linear calibration curve. The mixe-bed columns feature increasing linear calibration ranges, from TSKgel GMHhr-L, GMHhr-N, GMHhr-M, to GMHhr-H. TSKgel GMHhr-H(S) HT is a high temeperature mixed bed column shipped in ODCB, o-dichlorobenzene.

 


Contact us:

Tech Service:
800-366-4875 (option #3)

Customer Service:
866-527-3587

info.tbl@tosoh.com
 


Return to HPLC Columns main page

Return to Size Exclusion main page


EcoSEC GPC System main page

Separation Report -- Solvent-Compatible High Performance GPC Columns:TSKgel Hhr Series

Tosoh Bioscience LLC 3604 Horizon Drive, Suite 100, King of Prussia, PA, 19406 Tel: (800) 366-4875  Email: info.tbl@tosoh.com