TSKgel PWxl columns are composed of spherical, hydrophilic polymethacrylate beads. The main application area for TSKgel PWxl columns is the analysis of water-soluble polymers, such as celluloses, acrylamides, glycols, dextrans, polyvinylalcohol, and oligosaccharides. See the table on the TSKgel PW page for typical samples and suitable eluents. Figure 1 shows the calibration curves for all TSKgel PWxl-type columns. Figure 2 shows the benefits of TSKgel PWxl columns over TSKgel PW columns, namely the improved resolution due to the smaller particle sizes used in TSKgel PWxl columns.
|
Figure 1: Polyethylene glycol and oxide calibration curves on TSKgel PWxl columns

|
Figure 2: Faster analysis and higher resolution with TSKgel PWxl columns

|
|
|
Although proteins can be analyzed on TSKgel PWxl columns, pore volumes are much smaller than on TSKgel SW-type columns. Figure 3 demonstrates the limited separation power of TSKgel PWxl for protein samples.
Specialty Columns TSKgel G-DNA-PW is available for the analysis of DNA fragments. Similarly, TSKgel G-Oligo-PW is the preferred column for the analysis of oligosaccharides. The mixed-mode column, TSKgel GMPWxl, has an extended linear calibration range, suitable for samples with a broad MW distribution and unknowns.
A smaller particle size version of the popular TSKgel G-Oligo-PW column for oligomer separation is now also available. By using 3 micron instead of 7 micron particles a separation performed on an TSKgel G-Oligo-PW column can be done in half the time on a TSKgel SuperOligoPW column. |
Figure 3: Protein Calibration curves for TSKgel PWxl 
|
| |
|
Contact us:
Tech Service: 800-366-4875 (option #3)
Customer Service: 866-527-3587
info.tbl@tosoh.com | |
Return to HPLC Columns main page
Return to Size Exclusion main page
Application Overview -- Gel Filtration Chromatography with TSKgel columns
Separation Report -- Introduction of Aqueous SEC Columns: TSKgel PWxl series
Use TSKgel SuperOligoPW columns for the determination of molecular mass of water-soluble oligomers and low MW polymers.
|
| We
have updated our survey. Yes, we still love your feedback and it still takes
only 30 seconds.
|
| Please
click here .
|
|